YMAHA ルータ コマンド
show command
administrator: Logs in as an administrator.
administrator password: Assigns a password for administrator.
administrator password encrypted: Assigns a password for administrator.
Saves to encrypt a password
administrator radius auth: Enables or disables RADIUS for administrative
authentication.
alarm batch: Enable or disable alarm on executing batch file.
alarm entire: Enables or disables alarm sound.
alarm http revision-up: Enable or disable alarm on http revision-up.
alarm http upload: Enable or disable alarm on http-upload module.
alarm lua: Enable or disable alarm on executing Lua script
function.
alarm mobile: Enable or disable alarm on mobile connection.
alarm sd: Enable or disable alarm on microSD module.
alarm startup: The kind of the alarm when starting is set.
alarm usbhost: Enable or disable alarm on USB-host module.
alias: Sets alias.
ap config directory: Sets a directory path to save AP's config file.
ap config filename: Sets a file to save AP's config.
ap control config delete: Delete AP's config file.
ap control config get: Transfer the config file from AP.
ap control config set: Transfer the config file to AP.
ap control config-auto-set use: Use config auto set or not.
ap control firmware update go: Execute AP firmware update.
ap control http proxy timeout: Adjusts the interval waiting for ap control
http proxy.
ap control http proxy use: Use ap control http proxy or not.
ap select: Select AP.
auth user: Assigns a username and a password for Authentication.
auth user attribute: Set user attribute for Authentication.
auth user group: Assigns userid to an Authentication group.
auth user group attribute: Set group attribute for Authentication.
bgp aggregate: Defines aggregated route to BGP.
bgp aggregate filter: Defines the filter for aggregated route.
bgp autonomous-system: Set the autonomous system number.
bgp configure refresh: Refresh BGP configure.
bgp default med: Set default MED to the route without MED in the best
path selection of BGP
bgp export: Export specified BGP routes.
bgp export aspath: Export specified BGP routes.
bgp export filter: Defines the filter for exportation of BGP routes.
bgp force-to-advertise: Force to advertise BGP entry.
bgp import: Import route to BGP from specified protocol.
bgp import filter: Defines the filter for importation of BGP routes.
bgp log: Specifies the sort of information logged by BGP.
bgp neighbor: Defines the BGP neighbor.
bgp neighbor pre-shared-key: Sets pre-shared key used by TCP MD5.
bgp preference: Set route preference from BGP.
bgp reric interval: Set interval time that reflects external-route to BGP
when the interface state was changed.
bgp router id: Set router id for BGP.
bgp use: Use BGP, or not.
bridge learning BRIDGE-INTERFACE: Enables or Disables bridge learning.
bridge learning BRIDGE-INTERFACE static: Statically add learning information
for specified MAC address with interface.
bridge learning BRIDGE-INTERFACE timer: Adjusts the interval until delete
learning information.
bridge member BRIDGE-INTERFACE: Sets bridge members.
call: Execute macro.
clear account: Clears account.
clear account ngn data: Clears account for NGN(DATA).
clear account pp: Clears account for PP.
clear account tunnel: Clears account for NGN TUNNEL.
clear arp: Clears ARP table.
clear boot list: Clears Boot information.
clear bridge learning BRIDGE-INTERFACE: Clear all learning information.
clear diagnosis config port: Clears all history of followed command's result,
diagnose config port map/access.
clear dns cache: Clears DNS cache.
clear external-memory syslog: SYSLOG stored in external memory clear and
delete backup files.
clear heartbeat2: Clears the status for heartbeat(release-2).
clear ip dynamic routing: Clears all non-static IP routes.
clear ipv6 dynamic routing: Clears all non-static IPv6 routes.
clear ipv6 neighbor cache: Clears all IPv6 neighbor cache.
clear log: Clears log.
clear mobile access limitation: Clear call limitation for specified mobile
interface.
clear mobile access limitation pp: Clear call limitation for specified PP.
clear nat descriptor dynamic: Clears dynamic NAT information.
clear nat descriptor interface dynamic pp: Clears dynamic NAT information for
the interface.
clear nat descriptor interface dynamic tunnel: Clears dynamic NAT information
for the interface.
clear nat descriptor interface dynamic wan1: Clears dynamic NAT information
for the interface.
clear nat descriptor interface dynamic LAN-INTERFACE: Clears dynamic NAT
information for the interface.
clear nat descriptor masquerade session statistics: Clears session statistics
used on IP masquerade.
clear pppoe pass-through learning: Clear all learning information.
clear status pp: Clear status of PP counters.
clear status tunnel: Clear status of TUNNEL counters.
clear status wan1: Clear status of interface counters.
clear status LAN-INTERFACE: Clear status of interface counters.
clear status BRIDGE-INTERFACE: Clear status of BRIDGE counters.
clear switching-hub macaddress: Clears switching-hub dynamic macaddress table.
clear url filter: Clear URL filter information.
cloud vpn bind: Sets bound interfaces for cloud service.
cloud vpn name: Specify the name of cloud setting.
cloud vpn option: Specify the option of cloud service to connect to VPN.
cloud vpn parameter: Specify the parameters of cloud service to connect to
VPN.
cloud vpn service: Specify the cloud service to connect to VPN.
cloud vpn set go: Set for VPN connection with the cloud service.
cloud vpn syslog: Enables or disables whether to output detail
information
when connecting with cloud service to SYSLOG.
cold start: Restarts using the factory standard configuration.
confirm: Confirm configuration change and stop rollback timer.
connect: Manually connects to specified PP or TUNNEL.
console character: Selects character set.
console columns: Sets the number of characters on single line of the
console screen.
console info: Enables or disables display of system information on
the console.
console lines: Sets the console screen lines.
console prompt: Sets console prompt of up to 64 letters.
cooperation bandwidth-measuring: Enable or disable bandwidth-measuring
function.
cooperation bandwidth-measuring go: Does bandwidth-measuring.
cooperation bandwidth-measuring remote: Sets the other party information.
cooperation load-watch: Enable or disable load-watch function.
cooperation load-watch control: Sets the load watch control.
cooperation load-watch go: Sends load-watch packet.
cooperation load-watch remote: Sets the other party information.
cooperation load-watch trigger: Sets the load watch trigger.
cooperation port: Sets port of cooperation function.
copy: Copies file or directory.
copy config: Copy config FILE1 to config FILE2.
copy exec: Copy exec FILE1 to exec FILE2.
date: Sets date.
delete: Deletes file or directory.
delete config: Delete config FILE.
delete exec: Delete exec FILE.
description: Sets description of the system
description pp: Sets description of the interface
description tunnel: Sets description of the interface
description wan1: Sets description of the interface
description yno: Sets description of this device for YNO.
description LAN-INTERFACE: Sets description of the interface
dhcp client client-identifier: Specify the type and client-identifier field
for the DHCP client-identifier option.
dhcp client hostname: Specify dhcp client host name.
dhcp client option: Specify dhcp client option
dhcp client release linkdown: Specifies the linkdown behavior of the DHCP
client.
dhcp convert: Converts the lease to bind.
dhcp duplicate check: Sets the DHCP address duplicate check time[ms].
dhcp manual lease: Lease IP address to specified client.
dhcp manual release: Release IP address.
dhcp relay select: Sets method for DHCP server selection for the DHCP
relay agent function.
dhcp relay server: Sets up to 4 IP addresses of DHCP servers for the DHCP
relay agent function.
dhcp relay srcport: Sets source port of DHCP relay agent.
dhcp relay threshold: Adjusts relay threshold to DHCP server.
dhcp scope: Defines DHCP scope for the DHCP server function.
dhcp scope bind: Binds IP address in a DHCP scope to specified client.
dhcp scope lease type: Sets the DHCP server lease behavior.
dhcp scope option: Defines DHCP scope option.
dhcp server rfc2131 compliant: Sets the DHCP server behavior compliant with
RFC2131 or not.
dhcp service: Selects the DHCP function.
diagnose config port access pp: Diagnoses access range to specified port.
diagnose config port access wan1: Diagnoses access range to specified port.
diagnose config port access LAN-INTERFACE: Diagnoses access range to specified
port.
diagnose config port map pp: Diagnoses router's port map.
diagnose config port map wan1: Diagnoses router's port map.
diagnose config port map LAN-INTERFACE: Diagnoses router's port map.
diagnosis config port history-num: Sets history number in followed command's
result, diagnose config port map/access.
diagnosis config port max-detect: Sets max detection number in followed
commands, diagnose config port map/access.
disconnect: Manually disconnects the specified PP or TUNNEL.
disconnect ip connection: Disconnects IP connections.
disconnect ipv6 connection: Disconnects IPv6 connections.
disconnect user: Manually disconnects the specified Login user.
dns cache max entry: Sets maximum entry number of DNS cache.
dns cache use: Enables or disables DNS cache.
dns domain: Specifies DNS domain.
dns host: Sets hosts which is permitted to access to DNS server.
dns notice order: Sets the order of DNS server notify for PROTOCOL.
dns private address spoof: Enables or disables DNS private address spoofing.
dns server: Sets up to 4 IP addresses or DDNS server ID of DNS
servers.
dns server dhcp: Sets LAN , WAN , BRIDGE interface to query DNS server.
dns server pp: Sets PP number to query DNS server.
dns server select: Sets a rule to select DNS server for specified DNS
query or original sender.
dns service: Enables or disables DNS function.
dns service aaaa filter: Restrict inquiries on the AAAA record.
dns service fallback: Enables or disables DNS Fallback function.
dns srcport: Sets source port range of DNS.
dns static: Sets a static DNS record
dns syslog resolv: Enables or disables DNS resolver for syslog.
echo: Shows strings.
embedded file: Sets embedded file.
ethernet filter: Defines Ethernet filter.
ethernet tunnel filter: Configures ethernet filtering for the interface.
ethernet LAN-INTERFACE filter: Configures ethernet filtering for the
interface.
execute at-command: Execute AT commands for specified mobile interface.
execute batch: Execute a batch file.
exit: Exits from the router.
external-memory accelerator cache size: Sets the cache size to accelerate the
access of the external memory.
external-memory auto-search time: Limits search time in an external memory.
external-memory batch filename: Specifies the file name to execute by "execute
batch" command.
external-memory boot permit: Permit start from the file in an external memory,
or not.
external-memory cache mode: Sets operation mode of cache memory for
external-memory.
external-memory config filename: When you start with external memory are
mounted, sets the name of Configuration file loaded
from external memory. When you press the
EXTERNAL_MEMORY button and DOWNLOAD button
simultaneously, sets the name of Configuration file
copied from external memory.
external-memory exec filename: When you start with external memory are
mounted, sets the name of Exec file loaded from
external memory. When you press the EXTERNAL_MEMORY
button and DOWNLOAD button simultaneously, sets the
name of Exec file copied from external memory.
external-memory performance-test go: Checks the external memory performance.
external-memory statistics filename prefix: Specifies the file name to output
statistics on external memory.
external-memory syslog filename: Specifies the file name to output SYSLOG on
external memory.
grep: Shows only lines including pattern from all results by
adding grep to SHOW command.
heartbeat pre-shared-key: Sets pre-shared key used by heartbeat.
heartbeat receive: Process or not process received heartbeat packet.
heartbeat send: Send heartbeat packet.
heartbeat2 myname: Sets my name for heartbeat(release-2).
heartbeat2 receive: Defines a receipt for heartbeat(release-2).
heartbeat2 receive enable: Enables receipts for heartbeat(release-2).
heartbeat2 receive log: Enables or disables logging of receiving
heartbeats(release-2).
heartbeat2 receive monitor: Specifies the permissible interval for receiving
heartbeats(release-2).
heartbeat2 receive record limit: Specifies the maximum number of received
heartbeat(release-2) entries maintainable.
heartbeat2 transmit: Defines a transmission for heartbeat(release-2).
heartbeat2 transmit enable: Enables transmissions for heartbeat(release-2).
heartbeat2 transmit interval: Specifies the interval time for transmitting
heartbeats(release-2).
heartbeat2 transmit log: Enables or disables logging of transmitting
heartbeats(release-2).
help: Explains general console usages.
http revision-down permit: Permit revision down by http revision-up feature,
or not.
http revision-up go: Execute Revision check and Revision up using by HTTP
http revision-up permit: Permit http revision up, or not.
http revision-up proxy: Set Proxy-Server for http revision up
http revision-up schedule: Sets the schedule of HTTP Revision up
http revision-up timeout: Adjusts the interval waiting for http revision up.
http revision-up url: Set URL for http revision up
http upload: Set file uploaded by http.
http upload go: Execute upload files using by HTTP
http upload permit: Permit HTTP upload, or not.
http upload proxy: Set Proxy-Server and port number for HTTP upload
http upload retry interval: Adjusts the retry interval and retry count for
HTTP upload.
http upload timeout: Adjusts the interval waiting for HTTP upload.
http upload url: Set URL for HTTP upload
httpd custom-gui api password: Sets password of API for custom GUI.
httpd custom-gui api use: Use API for custom GUI or not.
httpd custom-gui use: Use custom GUI or not.
httpd custom-gui user: Sets user setting of custom GUI.
httpd host: Sets hosts which is permitted to access via http
browser.
httpd listen: Sets listen port of httpd server.
httpd proxy-access l2ms permit: Permit proxy GUI access by l2ms master, or
not.
httpd service: Starts or stop httpd server.
httpd timeout: Adjusts the interval waiting for http server.
import sshd authorized-keys: Import authorized-keys for sshd public key
authentication.
(key type) (a public key encoded with base64 encode)
(comment of key)
interface reset: Reset the Interface.
ip arp timer: Sets ARP expire timer.
ip filter: Defines IP filter.
ip filter directed-broadcast: Enables or disables filter for IP packet toward
Directed-Broadcast.
ip filter dynamic: Defines IP dynamic filter.
ip filter dynamic timer: Sets timeout values for IP dynamic filters.
ip filter fqdn timer: Sets cache timer for FQDN Filter.
ip filter set: Defines IP filter set.
ip filter source-route: Enables or disables filter for source routed IP
packet.
ip flow limit: Sets limit number of flows.
ip flow timer: Sets expire timer for flow table.
ip forward filter: Defines IP forward filter.
ip fragment remove df-bit: Clear DF bit against matched Packet by Rule
ip host: Binds NAME and IP-ADDRESS.
ip icmp echo-reply send: Send or not send ICMP Echo-Reply.
ip icmp echo-reply send-only-linkup: Send or not send ICMP Echo-Reply for ICMP
Echo which destination address is for linkdown
interface.
ip icmp error-decrypted-ipsec send: Send or not send ICMP error for the packet
decrypted IPsec.
ip icmp log: Log or not ICMP packets.
ip icmp mask-reply send: Send or not send ICMP Mask-Reply.
ip icmp parameter-problem send: Send or not send ICMP Parameter-Problem.
ip icmp redirect receive: Process or not process received ICMP Redirect.
ip icmp redirect send: Send or not send ICMP Redirect.
ip icmp time-exceeded send: Send or not send ICMP Time-Exceeded.
ip icmp timestamp-reply send: Send or not send ICMP Timestamp-Reply.
ip icmp unreachable send: Send or not send ICMP Unreachable.
ip implicit-route preference: Set route preference from implicit-route.
ip keepalive: Specify parameters for IP keepalive.
ip local forward filter: Configures IP forward filter for the interface.
ip loopback1 address: Sets IP address for the LOOPBACK interface
ip loopback1 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback1 secure filter: Configures IP filtering for the interface.
ip loopback2 address: Sets IP address for the LOOPBACK interface
ip loopback2 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback2 secure filter: Configures IP filtering for the interface.
ip loopback3 address: Sets IP address for the LOOPBACK interface
ip loopback3 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback3 secure filter: Configures IP filtering for the interface.
ip loopback4 address: Sets IP address for the LOOPBACK interface
ip loopback4 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback4 secure filter: Configures IP filtering for the interface.
ip loopback5 address: Sets IP address for the LOOPBACK interface
ip loopback5 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback5 secure filter: Configures IP filtering for the interface.
ip loopback6 address: Sets IP address for the LOOPBACK interface
ip loopback6 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback6 secure filter: Configures IP filtering for the interface.
ip loopback7 address: Sets IP address for the LOOPBACK interface
ip loopback7 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback7 secure filter: Configures IP filtering for the interface.
ip loopback8 address: Sets IP address for the LOOPBACK interface
ip loopback8 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback8 secure filter: Configures IP filtering for the interface.
ip loopback9 address: Sets IP address for the LOOPBACK interface
ip loopback9 ospf area: Sets OSPF area that specified interface is belong to.
ip loopback9 secure filter: Configures IP filtering for the interface.
ip null secure filter: Configures IP filtering for the interface.
ip pp address: Sets IP address for the PP interface
ip pp forward filter: Configures IP forward filter for the interface.
ip pp intrusion detection: Use or not IP Intrusion Detection.
ip pp intrusion detection notice-interval: Sets frequency of information of
intrusion detection notified in 1 second.
ip pp intrusion detection repeat-control: Notifies attack information of the
same target and type only once every 'TIME' seconds.
ip pp intrusion detection report: Sets maximum number of reports displayed by
'show ip intrusion detection'.
ip pp mtu: Sets IP MTU for selected Interface.
ip pp nat descriptor: Sets up to 16 NAT descriptors for LAN interface.
ip pp ospf area: Sets OSPF area that specified interface is belong to.
ip pp ospf neighbor: Sets the neighbor OSPF router for the non-broadcast
network.
ip pp rebound: Enables or disables IP rebound action
ip pp remote address: Sets remote IP address for selected PP.
ip pp remote address pool: Sets remote IP address pool for PP-Anonymous.
ip pp rip auth key: Sets authentication key for RIP2.
ip pp rip auth type: Sets authentication type for RIP2.
ip pp rip backup interface: Enables or disables the backup of interface
transmitting RIP packets.
ip pp rip connect interval: Adjusts the interval transmitting RIP during
connection for the interface.
ip pp rip connect send: Selects the trigger for transmitting RIP during
connection to the interface.
ip pp rip disconnect interval: Adjusts the interval transmitting RIP during
disconnection for the interface.
ip pp rip disconnect send: Selects the trigger for transmitting RIP during
disconnection to the interface.
ip pp rip filter: Configures RIP filter for the interface.
ip pp rip force-to-advertise: Force to advertise RIP entry.
ip pp rip hold routing: Holds or discards the RIP information obtained during
connection the interface.
ip pp rip hop: Adjusts RIP hop count for the interface.
ip pp rip receive: Receive or not IP RIP for the interface.
ip pp rip send: Send or not IP RIP for the interface.
ip pp rip trust gateway: Sets trust gateway for the interface.
ip pp secure filter: Configures IP filtering for the interface.
ip pp tcp mss limit: Enables or disables TCP MSS limit
ip pp tcp window-scale: Enables or Disables TCP Window Scale Option.
ip reassembly hold-time: Sets the time to keep fragment packets for
reassembly.
ip route: Sets a static IP route.
ip route change log: Enables or disables IP route change log.
ip routing: Enables or disables IP routing function.
ip routing process: Select the type of routing process.
ip simple-service: Enables or disables IP simple services.
ip stealth: Sets interfaces with stealth function.
ip tos supersede: Supersedes TOS field of transporting IP packet or not.
ip tunnel address: Sets IP address for the TUNNEL interface
ip tunnel forward filter: Configures IP forward filter for the interface.
ip tunnel intrusion detection: Use or not IP Intrusion Detection.
ip tunnel intrusion detection notice-interval: Sets frequency of information
of intrusion detection notified in 1 second.
ip tunnel intrusion detection repeat-control: Notifies attack information of
the same target and type only once every 'TIME'
seconds.
ip tunnel intrusion detection report: Sets maximum number of reports displayed
by 'show ip intrusion detection'.
ip tunnel mtu: Sets IP MTU for selected Interface.
ip tunnel nat descriptor: Sets up to 16 NAT descriptors for LAN interface.
ip tunnel ospf area: Sets OSPF area that specified interface is belong to.
ip tunnel ospf neighbor: Sets the neighbor OSPF router for the non-broadcast
network.
ip tunnel rebound: Enables or disables IP rebound action
ip tunnel remote address: Sets remote IP address for selected Tunnel
ip tunnel rip auth key: Sets authentication key for RIP2.
ip tunnel rip auth type: Sets authentication type for RIP2.
ip tunnel rip filter: Configures RIP filter for the interface.
ip tunnel rip force-to-advertise: Force to advertise RIP entry.
ip tunnel rip hop: Adjusts RIP hop count for the interface.
ip tunnel rip receive: Receive or not IP RIP for the interface.
ip tunnel rip send: Send or not IP RIP for the interface.
ip tunnel rip trust gateway: Sets trust gateway for the interface.
ip tunnel secure filter: Configures IP filtering for the interface.
ip tunnel tcp mss limit: Enables or disables TCP MSS limit
ip tunnel tcp window-scale: Enables or Disables TCP Window Scale Option.
ip wan1 address: Sets IP address for the WAN interface
ip wan1 dhcp auto default-route-add: Sets whether to add the default route by
getting DHCP address.
ip wan1 dhcp auto interface-route-add: Sets whether to add the implicit route
by getting DHCP address.
ip wan1 dhcp lease time: Set requested IP address lease time for the LAN, WAN,
Bridge.
ip wan1 dhcp retry: Set retransmission count and time for DHCP message
from the LAN, WAN, Bridge.
ip wan1 forward filter: Configures IP forward filter for the interface.
ip wan1 intrusion detection: Use or not IP Intrusion Detection.
ip wan1 intrusion detection notice-interval: Sets frequency of information of
intrusion detection notified in 1 second.
ip wan1 intrusion detection repeat-control: Notifies attack information of the
same target and type only once every 'TIME' seconds.
ip wan1 intrusion detection report: Sets maximum number of reports displayed
by 'show ip intrusion detection'.
ip wan1 mtu: Sets IP MTU for selected Interface.
ip wan1 nat descriptor: Sets up to 16 NAT descriptors for LAN interface.
ip wan1 secure filter: Configures IP filtering for the interface.
ip wan1 tcp mss limit: Enables or disables TCP MSS limit
ip wan1 tcp window-scale: Enables or Disables TCP Window Scale Option.
ip LAN-INTERFACE address: Sets IP address for the LAN interface
ip LAN-INTERFACE arp log: Enables or disables output of ARP log.
ip LAN-INTERFACE arp queue length: Sets ARP queue length for the interface
ip LAN-INTERFACE arp static: Sets static ARP entry.
ip LAN-INTERFACE forward filter: Configures IP forward filter for the
interface.
ip LAN-INTERFACE intrusion detection: Use or not IP Intrusion Detection.
ip LAN-INTERFACE intrusion detection notice-interval: Sets frequency of
information of intrusion detection notified in 1
second.
ip LAN-INTERFACE intrusion detection repeat-control: Notifies attack
information of the same target and type only once
every 'TIME' seconds.
ip LAN-INTERFACE intrusion detection report: Sets maximum number of reports
displayed by 'show ip intrusion detection'.
ip LAN-INTERFACE mtu: Sets IP MTU for selected Interface.
ip LAN-INTERFACE nat descriptor: Sets up to 16 NAT descriptors for LAN
interface.
ip LAN-INTERFACE ospf area: Sets OSPF area that specified interface is belong
to.
ip LAN-INTERFACE ospf neighbor: Sets the neighbor OSPF router for the
non-broadcast network.
ip LAN-INTERFACE rebound: Enables or disables IP rebound action
ip LAN-INTERFACE rip auth key: Sets authentication key for RIP2.
ip LAN-INTERFACE rip auth type: Sets authentication type for RIP2.
ip LAN-INTERFACE rip filter: Configures RIP filter for the interface.
ip LAN-INTERFACE rip force-to-advertise: Force to advertise RIP entry.
ip LAN-INTERFACE rip hop: Adjusts RIP hop count for the interface.
ip LAN-INTERFACE rip receive: Receive or not IP RIP for the interface.
ip LAN-INTERFACE rip send: Send or not IP RIP for the interface.
ip LAN-INTERFACE rip trust gateway: Sets trust gateway for the interface.
ip LAN-INTERFACE secondary address: Sets secondary IP address for the
interface
ip LAN-INTERFACE tcp mss limit: Enables or disables TCP MSS limit
ip LAN-INTERFACE tcp window-scale: Enables or Disables TCP Window Scale
Option.
ip LAN-INTERFACE vrrp: Defines VRRP parameters for selected interface.
ip LAN-INTERFACE vrrp shutdown trigger: Defines VRRP shutdown trigger for
selected interface.
ip LAN-INTERFACE wol relay: Relay or not Wake On LAN Magic Packet
ip BRIDGE-INTERFACE address: Sets IP address for the BRIDGE interface
ip BRIDGE-INTERFACE dhcp auto default-route-add: Sets whether to add the
default route by getting DHCP address.
ip BRIDGE-INTERFACE dhcp auto interface-route-add: Sets whether to add the
implicit route by getting DHCP address.
ip BRIDGE-INTERFACE dhcp lease time: Set requested IP address lease time for
the LAN, WAN, Bridge.
ip BRIDGE-INTERFACE dhcp retry: Set retransmission count and time for DHCP
message from the LAN, WAN, Bridge.
ip BRIDGE-INTERFACE dhcp service: Selects the DHCP function for Interface.
ip BRIDGE-INTERFACE proxyarp: Enables or disables the use of Proxy ARP for the
LAN.
ip BRIDGE-INTERFACE secure filter: Configures IP filtering for the interface.
ipip keepalive log: Enables or disables logging of ipip keepalive.
ipip keepalive use: Use or no use keep-alive with IPIP.
ipsec auto refresh: Sets switch for auto SA refreshment.
ipsec ike always-on: Enables or disables IKE always-on connections.
ipsec ike auth method: Specifies the authentication method used by IKE.
ipsec ike backward-compatibility: Specifies the type of key exchange.
ipsec ike child-exchange type: Specifies the type of CREATE_CHILD_SA exchange
in IKEv2.
ipsec ike duration: Sets duration of IPsec SA.
ipsec ike eap myname: Specifies a name and a password used in EAP-MD5.
ipsec ike eap request: Enables or disables authentication with EAP-MD5.
ipsec ike eap send certreq: Send or not send CERTREQ payload in EAP-MD5.
ipsec ike encryption: Specifies the encryption algorithm used by IKE.
ipsec ike esp-encapsulation: Use or not use the UDP encapsulation of ESP
packets.
ipsec ike group: Specifies the group used by IKE.
ipsec ike hash: Specifies the hash algorithm used by IKE.
ipsec ike keepalive log: Syslog or not information of IKE keepalive.
ipsec ike keepalive use: Use or not use keep-alive with IKE.
ipsec ike license-key: Sets the license key for connections to Yamaha VPN
Client Software(CP).
ipsec ike license-key use: Enables or disables to apply license key for
connections to Yamaha VPN Client Software(CP).
ipsec ike local address: Specifies the address of local security gateway.
ipsec ike local id: Sets local ID used by IKE.
ipsec ike local name: Specifies the name of local security gateway.
ipsec ike log: Specifies the sort of information logged by IKE.
ipsec ike message-id-control: This command defines whether or not to control
the message ID strictly.
ipsec ike mode-cfg address: Assigns internal address pool.
ipsec ike mode-cfg address pool: Defines internal address pool.
ipsec ike mode-cfg method: Sets IKE Mode-Cfg method.
ipsec ike nat-traversal: Use or not use IPsec NAT Traversal.
ipsec ike negotiate-strictly: This command defines action when this router
receives different proposals from its configuration.
ipsec ike negotiation receive: Set whether or not to receive an initiation
packet.
ipsec ike payload type: Specifies the type of IKE payload.
ipsec ike pfs: Use or not use PFS with IKE.
ipsec ike pki file: Specifies the PKI file used by IKE.
ipsec ike pre-shared-key: Sets pre-shared key used by IKE.
ipsec ike proposal-limitation: This command defines whether or not to limit
proposals.
ipsec ike queue length: Sets the queue length for received IKE message.
ipsec ike remote address: Specifies the address or domain-name of remote
security gateway.
ipsec ike remote id: Sets remote ID used by IKE.
ipsec ike remote name: Specifies the name of remote security gateway.
ipsec ike restrict-dangling-sa: This command defines action whether this
router deletes IPsec SAs which correspond to IKE SAs
when deleting them.
ipsec ike retry: Sets retransmission count and time for IKE messages.
ipsec ike send info: Send or not send informational payloads with IKE.
ipsec ike version: Sets IKE version.
ipsec ike xauth myname: Specifies a name and a password used in XAUTH.
ipsec ike xauth request: Enables or disables user authentication with XAUTH.
ipsec ipcomp type: Selects compression algorithm used by IPCOMP.
ipsec log illegal-spi: Logs or not when receive illegal SPI.
ipsec refresh sa: Deletes all SAs and Initializes status of IKE.
ipsec sa delete: Deletes specified SA.
ipsec sa policy: Defines SA policy.
ipsec transport: Defines transport mode.
ipsec transport template: Defines ipsec transport template.
ipsec tunnel: Defines SA policy for selected TUNNEL interface.
ipsec tunnel fastpath-fragment-function follow df-bit: Enables or disables IP
fragmentation for esp with DF bit on fastpath.
ipsec tunnel outer df-bit: Sets how to construct IPsec tunnel outer IPv4
header's DF bit.
ipsec use: Enables or disables IPsec.
ipv6 filter: Defines IPv6 filter.
ipv6 filter dynamic: Defines IPv6 dynamic filter.
ipv6 icmp echo-reply send: Send or not send ICMP Echo-Reply.
ipv6 icmp echo-reply send-only-linkup: Send or not send ICMP Echo-Reply for
ICMP Echo which destination address is for linkdown
interface.
ipv6 icmp error-decrypted-ipsec send: Send or not send ICMP error for the
packet decrypted IPsec.
ipv6 icmp log: Log or not ICMP packets.
ipv6 icmp packet-too-big send: Send or not send ICMP Packet-Too-Big.
ipv6 icmp parameter-problem send: Send or not send ICMP Parameter-Problem.
ipv6 icmp redirect receive: Process or not process received ICMP Redirect.
ipv6 icmp redirect send: Send or not send ICMP Redirect.
ipv6 icmp time-exceeded send: Send or not send ICMP Time-Exceeded.
ipv6 icmp unreachable send: Send or not send ICMP Unreachable.
ipv6 loopback1 address: Sets IPv6 address for the interface
ipv6 loopback1 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback2 address: Sets IPv6 address for the interface
ipv6 loopback2 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback3 address: Sets IPv6 address for the interface
ipv6 loopback3 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback4 address: Sets IPv6 address for the interface
ipv6 loopback4 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback5 address: Sets IPv6 address for the interface
ipv6 loopback5 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback6 address: Sets IPv6 address for the interface
ipv6 loopback6 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback7 address: Sets IPv6 address for the interface
ipv6 loopback7 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback8 address: Sets IPv6 address for the interface
ipv6 loopback8 secure filter: Configures IPv6 filtering for the interface.
ipv6 loopback9 address: Sets IPv6 address for the interface
ipv6 loopback9 secure filter: Configures IPv6 filtering for the interface.
ipv6 max auto address: Sets maximum IPv6 auto address number.
ipv6 nd ns-trigger-dad: Enables or disables NS trigger DAD.
ipv6 null secure filter: Configures IPv6 filtering for the interface.
ipv6 ospf area: Define OSPFv3 area.
ipv6 ospf area network: ABR will advertise the aggregated route about
specified subnet to the areas except specified area,
or never advertise the route when 'restrict' is
specified.
ipv6 ospf configure refresh: Refresh OSPFv3 configuration.
ipv6 ospf export filter: Define route filter to export from OSPFv3.
ipv6 ospf export from: Limit exporting routes from OSPFv3.
ipv6 ospf import filter: Define route filter to import for OSPFv3.
ipv6 ospf import from: Import routes to OSPFv3 from specified protocol.
ipv6 ospf log: Specifies the sort of information logged by OSPFv3.
ipv6 ospf preference: Set route preference from OSPFv3.
ipv6 ospf router id: Set router id for OSPFv3.
ipv6 ospf use: Use OSPFv3, or not.
ipv6 ospf virtual-link: Set virtual link for OSPFv3 backbone area.
ipv6 pp address: Sets IPv6 address for the interface
ipv6 pp dad retry count: Sets the number of times to retry IPv6 DAD for
selected interface.
DAD is not performed when 0 is chosen.
ipv6 pp dhcp service: Configures DHCPv6 for the interface.
ipv6 pp mld: Configures MLD for the interface.
ipv6 pp mld static: Configures static MLD listener for the interface.
ipv6 pp mtu: Sets IPv6 MTU for selected LAN/PP/Tunnel.
ipv6 pp ospf area: Set OSPFv3 area that specified interface is belong to.
ipv6 pp prefix: Sets IPv6 prefix for the interface
ipv6 pp prefix change log: Enables or disables ipv6 INTERFACE prefix change
log.
ipv6 pp rip connect interval: Adjusts the interval transmitting RIP during
connection for the interface.
ipv6 pp rip connect send: Selects the trigger for transmitting RIP during
connection to the interface.
ipv6 pp rip disconnect interval: Adjusts the interval transmitting RIP during
disconnection for the interface.
ipv6 pp rip disconnect send: Selects the trigger for transmitting RIP during
disconnection to the interface.
ipv6 pp rip filter: Configures RIP filter for the interface.
ipv6 pp rip hold routing: Holds or discards the RIP information obtained
during connection the interface.
ipv6 pp rip hop: Adjusts RIP hop count for the interface.
ipv6 pp rip receive: Receive RIPng, or not, to the interface.
ipv6 pp rip send: Send RIPng, or not, to the interface.
ipv6 pp rip trust gateway: Sets trust gateway for the interface.
ipv6 pp rtadv send: Enables Router Advertisement.
ipv6 pp rtsol max-retransmit: Sets Router Solicitation retransmit
ipv6 pp secure filter: Configures IPv6 filtering for the interface.
ipv6 pp tcp mss limit: Enables or disables TCP MSS limit
ipv6 pp tcp window-scale: Enables or Disables TCP Window Scale Option.
ipv6 prefix: Sets IPv6 prefix for advertising.
ipv6 reassembly hold-time: Sets the time to keep ipv6 fragment packets for
reassembly.
ipv6 rh0 discard: Discards or not discards IPv6 packet with routing
header type 0 option.
ipv6 rip preference: Sets RIPng preference value.
ipv6 rip use: Use RIPng, or not.
ipv6 route: Sets a static IPv6 route.
ipv6 routing: Enables or disables IPv6 routing function.
ipv6 routing process: Select the type of routing process.
ipv6 source address selection rule: Sets IPv6 source address selection rule.
ipv6 stealth: Sets interfaces with stealth function.
ipv6 tunnel address: Sets IPv6 address for the interface
ipv6 tunnel dhcp service: Configures DHCPv6 for the interface.
ipv6 tunnel mld: Configures MLD for the interface.
ipv6 tunnel mld static: Configures static MLD listener for the interface.
ipv6 tunnel mtu: Sets IPv6 MTU for selected LAN/PP/Tunnel.
ipv6 tunnel ospf area: Set OSPFv3 area that specified interface is belong to.
ipv6 tunnel prefix: Sets IPv6 prefix for the interface
ipv6 tunnel prefix change log: Enables or disables ipv6 INTERFACE prefix
change log.
ipv6 tunnel rip filter: Configures RIP filter for the interface.
ipv6 tunnel rip receive: Receive RIPng, or not, to the interface.
ipv6 tunnel rip send: Send RIPng, or not, to the interface.
ipv6 tunnel secure filter: Configures IPv6 filtering for the interface.
ipv6 tunnel tcp mss limit: Enables or disables TCP MSS limit
ipv6 tunnel tcp window-scale: Enables or Disables TCP Window Scale Option.
ipv6 LAN-INTERFACE address: Sets IPv6 address for the interface
ipv6 LAN-INTERFACE dad retry count: Sets the number of times to retry IPv6 DAD
for selected interface.
DAD is not performed when 0 is chosen.
ipv6 LAN-INTERFACE dhcp service: Configures DHCPv6 for the interface.
ipv6 LAN-INTERFACE icmp-nd queue length: Set the queue length that holds
transmission packets until address resolution with
Neighbor Discovery has been completed.
ipv6 LAN-INTERFACE mld: Configures MLD for the interface.
ipv6 LAN-INTERFACE mld static: Configures static MLD listener for the
interface.
ipv6 LAN-INTERFACE mtu: Sets IPv6 MTU for selected LAN/PP/Tunnel.
ipv6 LAN-INTERFACE neighbor cache max entry: Sets maximum entry number of IPv6
neighbor cache.
ipv6 LAN-INTERFACE ospf area: Set OSPFv3 area that specified interface is
belong to.
ipv6 LAN-INTERFACE prefix: Sets IPv6 prefix for the interface
ipv6 LAN-INTERFACE prefix change log: Enables or disables ipv6 INTERFACE
prefix change log.
ipv6 LAN-INTERFACE rip filter: Configures RIP filter for the interface.
ipv6 LAN-INTERFACE rip hop: Adjusts RIP hop count for the interface.
ipv6 LAN-INTERFACE rip receive: Receive RIPng, or not, to the interface.
ipv6 LAN-INTERFACE rip send: Send RIPng, or not, to the interface.
ipv6 LAN-INTERFACE rip trust gateway: Sets trust gateway for the interface.
ipv6 LAN-INTERFACE rtadv send: Enables Router Advertisement.
ipv6 LAN-INTERFACE rtsol max-retransmit: Sets Router Solicitation retransmit
ipv6 LAN-INTERFACE secure filter: Configures IPv6 filtering for the interface.
ipv6 LAN-INTERFACE tcp mss limit: Enables or disables TCP MSS limit
ipv6 LAN-INTERFACE tcp window-scale: Enables or Disables TCP Window Scale
Option.
ipv6 LAN-INTERFACE vrrp: Defines VRRP parameters for selected interface.
ipv6 LAN-INTERFACE vrrp shutdown trigger: Defines VRRP shutdown trigger for
selected interface.
ipv6 BRIDGE-INTERFACE address: Sets IPv6 address for the interface
ipv6 BRIDGE-INTERFACE dad retry count: Sets the number of times to retry IPv6
DAD for selected interface.
DAD is not performed when 0 is chosen.
ipv6 BRIDGE-INTERFACE prefix: Sets IPv6 prefix for the interface
ipv6 BRIDGE-INTERFACE prefix change log: Enables or disables ipv6 INTERFACE
prefix change log.
ipv6 BRIDGE-INTERFACE secure filter: Configures IPv6 filtering for the
interface.
l2tp always-on: Enabled or disables l2tp always-on connections.
l2tp hostname: Sets l2tp hostname.
l2tp keepalive log: Enables or disables logging of l2tp keepalive.
l2tp keepalive use: Use or no use keep-alive with L2TP.
l2tp local router-id: Sets Local Router ID for L2TPv3.
l2tp remote end-id: Sets Remote End ID for L2TPv3.
l2tp remote router-id: Sets Remote Router ID for L2TPv3.
l2tp service: Starts or stop l2tp server.
l2tp syslog: Enabled or disables l2tp control connection syslog.
l2tp tunnel auth: Enables or disables l2tp tunnel authentication.
l2tp tunnel disconnect time: Adjusts or clears the interval waiting for next
l2tp data packet before disconnecting.
lan backup recovery time LAN-INTERFACE: Set or clear the delay time when
backup interface comes to be recovered
lan backup LAN-INTERFACE: Specify the backup interface when detected down of
LAN connection.
lan keepalive interval LAN-INTERFACE: Specify the keepalive interval and
counter to detect down.
lan keepalive log LAN-INTERFACE: Enables or disables logging of keepalive.
lan keepalive use LAN-INTERFACE: Select kind of keepalive.
lan link-aggregation static: Specifies the Lan port for static link
aggregation.
lan linkup send-wait-time LAN-INTERFACE: Sets wait seconds after linkup of LAN
interface.
lan port-mirroring LAN-INTERFACE: Specifies the Lan port mirroring.
lan shutdown LAN-INTERFACE: Shutdown LAN interface.
lan type LAN-INTERFACE: Specifies the Lan type.
lan-map log: Enables or disables output of SYSLOG about LANMAP.
lan-map snapshot use LAN-INTERFACE: Use snapshot function or not.
lan-map snapshot use LAN-INTERFACE: Use snapshot function or not.
lan-map snapshot use BRIDGE-INTERFACE: Use snapshot function or not.
lan-map sysname: Set system name for Lanmap.
lan-map terminal watch interval: Specify the check interval of terminal watch.
less: Let be scrolled the output of commands.
less config: Shows configuration.
less config ap: Shows configuration for specified AP.
less config list: Shows configuration.
less config pp: Shows configuration.
less config switch: Shows configuration for specified switch.
less config tunnel: Shows configuration.
less exec list: Shows exec information.
less file list: Shows File List.
less log: Shows log.
load: Load configuration.
login password: Assigns a password for login.
login password encrypted: Assigns a password for login.
Saves to encrypt a password
login radius use: Enables or disables RADIUS for login authentication.
login timer: Limits or clears login duration.
login user: You needs to enter Username and Password.
Assigns a username and a password for login.
lua: Executes Lua script.
lua use: Activates Lua script function.
luac: Compiles Lua script.
macro: Sets macro.
mail notify: Sets trigger for Mail Notification.
mail notify status exec: Send status info by e-mail.
mail server name: Sets Name of Mail Server.
mail server pop: Sets POP Server.
mail server smtp: Sets SMTP Server.
mail server timeout: Adjusts the timeout waiting for mail server
connection.
mail template: Sets Template for Mail Sending.
make directory: Makes directory.
mobile access limit connection length: Adjusts or clears the send/receive
length for selected PP.
mobile access limit connection time: Adjusts or clears the access time for
selected PP.
mobile access limit duration: Sets the total limit duration time for selected
PP.
mobile access limit length: Adjusts or clears the send/receive total length
for selected PP.
mobile access limit time: Adjusts or clears the total access time for selected
PP.
mobile access-point name: Sets an Access Point Name and CID (Context
Identifier)
mobile arrive permit: Enables or disables mobile internet response for
incoming call from selected PP.
mobile arrive use: Use mobile arrive internet access, or not.
mobile auto connect: Enables or disables mobile internet access
auto-connection for selected PP.
mobile call prohibit auth-error count: Sets the maximum authentication error
count for selected PP. If the count is over, you must
execute 'pp auth' command again to retry same PP.
mobile call type: Set the call type of the mobile device.
mobile carrier mode: Set the carrier mode of the mobile device.
mobile dial number: Sets the dial string following ATD command.
mobile disconnect input time: Adjusts or clears the interval waiting for next
input packet before disconnecting selected PP.
mobile disconnect output time: Adjusts or clears the interval waiting for next
output packet before disconnecting selected PP.
mobile disconnect time: Adjusts or clears the disconnecting idle timer for
selected PP.
mobile display caller id: Enables or disables displaying own caller ID at
calling.
mobile firmware update go: Execute mobile terminal firmware update.
mobile pin code usb1: The PIN code is set.
mobile signal-strength: Set the parameter for acquiring the signal strength.
mobile signal-strength go: Acquire the signal strength from the terminals.
mobile syslog: Enabled or disables mobile internet access detailed
syslog.
mobile use: Use mobile internet access, or not.
nat descriptor address inner: Sets the inner addresses of NAT.
nat descriptor address outer: Sets the outer addresses of NAT.
nat descriptor backward-compatibility: Specifies the NAT/IP masquerade
compatibility type.
nat descriptor ftp port: Sets FTP port number.
nat descriptor log: Log NAT address binding.
nat descriptor masquerade incoming: Selects the policy to handle incoming
packets which correspond to no IP masquerade tables.
nat descriptor masquerade port range: Sets port number range for IP
masquerade.
nat descriptor masquerade remove df-bit: Remove DF-bit when IP masquerade
translation or not.
nat descriptor masquerade rlogin: Passes or shuts out rlogin/rcp traffic with
IP Masquerade.
nat descriptor masquerade session limit: Sets a limit of IP masquerade
sessions for each host.
nat descriptor masquerade session limit total: Sets a number of total IP
masquerade sessions limit on the NAT Descriptor.
nat descriptor masquerade static: Defines static IP Masquerade table.
nat descriptor masquerade unconvertible port: Sets unconvertible port numbers
for IP Masquerade.
nat descriptor sip: Sets which rewrite SIP packet's IP Address for NAT.
nat descriptor static: Sets the static bind of NAT.
nat descriptor timer: Sets expire timer for dynamic NAT pair.
nat descriptor type: Selects the function of NAT.
netvolante-dns auto hostname pp: Enables or disables Netvolante DNS hostname
auto assignment.
netvolante-dns auto hostname wan1: Enables or disables Netvolante DNS hostname
auto assignment.
netvolante-dns auto hostname LAN-INTERFACE: Enables or disables Netvolante DNS
hostname auto assignment.
netvolante-dns auto save: Sets filename to save setting when register to
netvolante DNS completes.or 'OFF' means prohibit auto
saving, 'AUTO' means save to config file that
presently using.
netvolante-dns delete go pp: Delete configuration from Netvolante DNS server.
netvolante-dns delete go wan1: Delete configuration from Netvolante DNS
server.
netvolante-dns delete go LAN-INTERFACE: Delete configuration from Netvolante
DNS server.
netvolante-dns get hostname list: Get Netvolante DNS hostname list.
netvolante-dns go pp: Add or Update to Netvolante DNS.
netvolante-dns go wan1: Add or Update to Netvolante DNS.
netvolante-dns go LAN-INTERFACE: Add or Update to Netvolante DNS.
netvolante-dns hostname host pp: Specifies Netvolante DNS hostname for
selected interface.
netvolante-dns hostname host wan1: Specifies Netvolante DNS hostname for
selected interface.
netvolante-dns hostname host LAN-INTERFACE: Specifies Netvolante DNS hostname
for selected interface.
netvolante-dns port: Specifies port number for Netvolante DNS connection.
netvolante-dns register timer: Sets interval on that register to netvolante
DNS server.
netvolante-dns retry interval pp: Adjusts the retry interval and retry count
for Netvolante DNS connection.
netvolante-dns retry interval wan1: Adjusts the retry interval and retry count
for Netvolante DNS connection.
netvolante-dns retry interval LAN-INTERFACE: Adjusts the retry interval and
retry count for Netvolante DNS connection.
netvolante-dns server: Specifies Netvolante DNS server address or domain,
name, password.
netvolante-dns server update address port: Sets port number for Netvolante DNS
server address update procedure.
netvolante-dns server update address use: Enables or disables updating
Netvolante DNS server address.
netvolante-dns set hostname pp: Sets Netvolante DNS hostname serial number
included.
netvolante-dns set hostname wan1: Sets Netvolante DNS hostname serial number
included.
netvolante-dns set hostname LAN-INTERFACE: Sets Netvolante DNS hostname serial
number included.
netvolante-dns timeout pp: Adjusts the interval waiting for Netvolante DNS
connection.
netvolante-dns timeout wan1: Adjusts the interval waiting for Netvolante DNS
connection.
netvolante-dns timeout LAN-INTERFACE: Adjusts the interval waiting for
Netvolante DNS connection.
netvolante-dns use pp: Enables or disables Netvolante DNS service.
netvolante-dns use wan1: Enables or disables Netvolante DNS service.
netvolante-dns use LAN-INTERFACE: Enables or disables Netvolante DNS service.
ngn radius account callee: Enables or disables RADIUS accounting when
receiving a call from NGN network.
ngn radius account caller: Enables or disables RADIUS accounting when calling
to NGN network.
ngn radius auth password: Sets password used when authenticating NGN telephone
number via RADIUS.
ngn renumbering link-refresh: Sets whether to refresh the link of LAN
interface by NGN renumbering.
ngn type LAN-INTERFACE: The kind of LAN interface that uses NGN is specified.
nslookup: Resolve DNS
ntp backward-compatibility: Sets the compatibility of NTP function.
ntp local address: Set the source address of NTP packet.
ntpdate: Sets date from NTP server.
operation button function download: The function when the DOWNLOAD button is
pressed is set.
operation execute batch permit: Permit execute batch by DOWNLOAD button, or
not.
operation external-memory download permit: Permit copying CONFIG and EXEC by
EXTERNAL_MEMORY button and DOWNLOAD button, or not.
operation http revision-up permit: Permit revision-up by DOWNLOAD button, or
not.
ospf area: Defines OSPF area
ospf area network: ABR will advertise the aggregated route about
specified network to the areas except specified area,
or never advertise the route when 'restrict' is
specified.
ospf area stubhost: Advertises the specified host is a stub host
ospf configure refresh: Refresh OSPF configure.
ospf export filter: Route filter export from OSPF.
ospf export from: Limit exporting route from OSPF.
ospf import filter: Route filter to import for OSPF.
ospf import from: Import route to OSPF from specified protocol.
ospf log: Specifies the sort of information logged by OSPF.
ospf merge equal cost stub: Merge equal cost stub or not.
ospf preference: Set route preference from OSPF.
ospf reric interval: Set interval time that reflects external-route to OSPF
when the interface state was changed.
ospf router id: Set router id for OSPF.
ospf use: Use OSPF, or not.
ospf virtual-link: Set virtual-link for OSPF backbone area.
packetdump pp: Dump packets for the interface.
packetdump wan1: Dump packets for the interface.
packetdump LAN-INTERFACE: Dump packets for the interface.
ping: Invokes a diagnostic tool for testing connectivity to
specified destination.
ping6: Invoke ping6 tool to specified destination.
pki certificate file: Sets the certificate file.
pki crl file: Sets the crl file.
pp always-on: Enables or disables pp always-on connection.
pp auth accept: Sets acceptable authentication.
pp auth multi connect prohibit: Prohibit or not to multi connect by one user.
pp auth myname: Sets my name and password for authentication.
pp auth request: Sets request authentication.
pp auth username: Sets username and password for authentication.
CALL/ARRIVE-ISDN and IP-ADDRESS can use if
PP_Anonymous is selected.
pp backup: Specify the backup interface when detected down of PPP
connection.
pp backup recovery time: Set or clear the delay time when backup line comes to
be recovered
pp bind: Sets bound interfaces for selected PP.
pp disable: Disable the selected PP interface.
pp enable: Enables the selected PP interface.
pp keepalive interval: Specify the keepalive interval and counter to detect
down.
pp keepalive log: Enables or disables logging of keepalive.
pp keepalive use: Enables or disables keepalive.
pp name: Sets PP name.
pp select: Selects PP number.
ppp bacp maxconfigure: [PPP_BACP] Adjusts the parameter bacp-max-configure.
ppp bacp maxfailure: [PPP_BACP] Adjusts the parameter bacp-max-failure.
ppp bacp maxterminate: [PPP_BACP] Adjusts the parameter bacp-max-terminate.
ppp bacp restart: [PPP_BACP] Adjusts the parameter bacp-restart.
ppp bap maxretry: [PPP_BAP] Adjusts the parameter max-retry.
ppp bap restart: [PPP_BAP] Adjusts the parameter bap-restart.
ppp ccp maxconfigure: [PPP_CCP] Adjusts the parameter ccp-max-configure.
ppp ccp maxfailure: [PPP_CCP] Adjusts the parameter ccp-max-failure.
ppp ccp maxterminate: [PPP_CCP] Adjusts the parameter ccp-max-terminate.
ppp ccp no-encryption: Enable or disables the connection without encryption.
ppp ccp restart: [PPP_CCP] Adjusts the parameter ccp-restart.
ppp ccp type: [PPP_CCP] Selects compression or encryption type.
ppp chap maxchallenge: [PPP_CHAP] Adjusts the parameter chap-max-challenge.
ppp chap restart: [PPP_CHAP] Adjusts the parameter chap-restart.
ppp ipcp ipaddress: [PPP_IPCP] Enables or disables the use of IP address
negotiation.
ppp ipcp maxconfigure: [PPP_IPCP] Adjusts the parameter ipcp-max-configure.
ppp ipcp maxfailure: [PPP_IPCP] Adjusts the parameter ipcp-max-failure.
ppp ipcp maxterminate: [PPP_IPCP] Adjusts the parameter ipcp-max-terminate.
ppp ipcp msext: [PPP_IPCP] Enables or disables the use of MS-Extended
IPCP options.
ppp ipcp remote address check: [PPP_IPCP] Check or pass IPCP remote IP
address.
ppp ipcp restart: [PPP_IPCP] Adjusts the parameter ipcp-restart.
ppp ipcp vjc: [PPP_IPCP] Enables or disables the use of Van Jacobson
Compressed TCP/IP.
ppp ipv6cp use: Use IPV6CP, or not.
ppp lcp accm: [PPP_LCP] Enables or disables the use of
Async-Control-Character-Map option.
ppp lcp acfc: [PPP_LCP] Enables or disables the use of
Address-and-Control-Field-Compression option.
ppp lcp magicnumber: [PPP_LCP] Enables or disables the use of Magic-Number
option.
ppp lcp maxconfigure: [PPP_LCP] Adjusts the parameter lcp-max-configure.
ppp lcp maxfailure: [PPP_LCP] Adjusts the parameter lcp-max-failure.
ppp lcp maxterminate: [PPP_LCP] Adjusts the parameter lcp-max-terminate.
ppp lcp mru: [PPP_LCP] Enables or disables the use of
Maximum-Receive-Unit option.
ppp lcp pfc: [PPP_LCP] Enables or disables the use of
Protocol-Field-Compression option.
ppp lcp restart: [PPP_LCP] Adjusts the parameter lcp-restart.
ppp lcp silent: [PPP_LCP] Wait to send LCP Configure-Request until
peer send it.
ppp mp control: Selects MP control side.
ppp mp divide: Choice MP packet sending method.
ppp mp interleave: Enables or disables MP interleave function.
ppp mp load threshold: Sets MP call/disc load threshold.
ppp mp maxlink: Sets maximum number of MP link.
ppp mp minlink: Sets minimum number of MP link.
ppp mp timer: Sets interval to calculate load for MP.
ppp mp use: Enables or disables MP.
ppp mscbcp maxretry: [PPP_MSCBCP] Adjusts the parameter max-retry.
ppp mscbcp restart: [PPP_MSCBCP] Adjusts the parameter mscbcp-restart.
ppp pap maxauthreq: [PPP_PAP] Adjusts the parameter pap-max-authreq.
ppp pap restart: [PPP_PAP] Adjusts the parameter pap-restart.
pppoe access concentrator: Specifies Access Concentrator Name for PPPoE.
pppoe auto connect: Enables or disables PPPoE auto-connection for selected
PP.
pppoe auto disconnect: Enables or disables PPPoE auto-disconnection for
selected PP.
pppoe disconnect time: Adjusts or clears the interval waiting for next packet
before disconnecting selected PP.
pppoe invalid-session forced close: Enables or disables to close invalid PPPoE
session forcibly.
pppoe padi maxretry: Adjusts PADI max retry count for PPPoE.
pppoe padi restart: Adjusts PADI restart time for PPPoE.
pppoe padr maxretry: Adjusts PADR max retry count for PPPoE.
pppoe padr restart: Adjusts PADR restart time for PPPoE.
pppoe pass-through member: Sets PPPoE pass through members.
pppoe service-name: Specifies Service-Name for PPPoE.
pppoe tcp mss limit: Enables or disables TCP MSS limit over PPPoE.
pppoe use: Enables or disables PPPoE and sets bound interface for
selected PP.
pptp hostname: Sets hostname.
pptp keepalive interval: Specify the pptp keepalive interval and counter to
detect down.
pptp keepalive log: Enables or disables logging of pptp keepalive.
pptp keepalive use: Enables or disables pptp keepalive.
pptp service: Starts or stop pptp server.
pptp service type: Selects the PPTP function.
pptp syslog: Enabled or disables pptp control connection syslog.
pptp tunnel disconnect time: Adjusts or clears the interval waiting for next
pptp packet before disconnecting selected PP.
pptp vendorname: Sets vendor name.
pptp window size: Adjusts or clears the receive window size for pptp
control packet.
queue class filter: Defines Queue filter.
queue pp class filter list: Sets applying queue filters.
queue pp default class: Sets default class for queueing.
queue pp length: Sets transmit queue length.
queue pp type: Sets queueing strategy.
queue tunnel class filter list: Sets applying queue filters.
queue tunnel default class: Sets default class for queueing.
queue wan1 class control: Activates Dynamic Class Control function.
queue wan1 class filter list: Sets applying queue filters.
queue wan1 class property: Sets queue class's property.
queue wan1 default class: Sets default class for queueing.
queue wan1 length: Sets transmit queue length.
queue wan1 type: Sets queueing strategy.
queue LAN-INTERFACE class control: Activates Dynamic Class Control function.
queue LAN-INTERFACE class filter list: Sets applying queue filters.
queue LAN-INTERFACE class property: Sets queue class's property.
queue LAN-INTERFACE default class: Sets default class for queueing.
queue LAN-INTERFACE length: Sets transmit queue length.
queue LAN-INTERFACE type: Sets queueing strategy.
quit: Quits from the router.
radius account: Enables or disables RADIUS accounting.
radius account port: Sets port number of RADIUS accounting server.
radius account server: Sets IP address for RADIUS accounting servers.
radius auth: Enables or disables RADIUS authentication.
radius auth port: Sets port number of RADIUS authentication server.
radius auth server: Sets IP address for RADIUS authentication servers.
radius retry: Sets RADIUS retry count and time.
radius secret: Sets RADIUS secret.
radius server: Sets IP address for RADIUS servers.
rdate: Sets date from remote host.
remote setup accept: Specify the router which is permitted to set up your
one.
rename: Renames file/directory name or changes file/directory
path.
restart: Restarts using the configuration in nonvolatile
memory.
rip advertise mode: Specifies the mode of advertising for RIPv2.
rip filter rule: Sets RIP filter rule.
rip preference: Sets RIP preference value.
rip timer: Sets RIP timers.
rip use: Use RIP, or not.
rollback timer: Activate rollback timer.
rotate external-memory syslog: Rotate the SYSLOG stored in external memory.
rtfs format: Formats RTFS region of flash ROM
rtfs garbage-collect: Garbage collects in RTFS region of flash ROM
save: Saves the modified configuration into nonvolatile
memory.
schedule at: Executes COMMAND at specified DATE and TIME.
scp: Executes SCP.
sd use: Use microSD card, or not.
security class: Sets security class.
set: Sets variable.
set-default-config: Set the default config file.
set-default-exec: Set the default exec file.
set-serial-baudrate: Set serial baudrate.
sftpd host: Sets hosts which is permitted to access via sftp.
show account: Shows call and charge statistics.
show account ngn data: Shows call and charge statistics for NGN(DATA).
show account pp: Shows call and charge statistics for PP.
show account tunnel: Shows call and charge statistics for NGN TUNNEL.
show alias: Shows alias.
show arp: Shows the Arp table.
show bridge learning BRIDGE-INTERFACE: Shows learning information.
show command: Lists all commands.
show command history: Shows command history
show config: Shows configuration.
show config ap: Shows configuration for specified AP.
show config difference: Shows difference of configurations.
show config list: Shows configuration.
show config pp: Shows configuration.
show config switch: Shows configuration for specified switch.
show config tunnel: Shows configuration.
show copyright: Shows software copyright statement.
show diagnosis config port access: Shows a diagnosis of access range to
specific port.
show diagnosis config port map: Shows a diagnosis of router's port map.
show dns cache: Shows the DNS cache.
show environment: Shows the environmental information.
show exec list: Shows exec information.
show file list: Shows File List.
show ip connection: Shows IP connections which are inspected by Dynamic
Filters.
show ip connection detail: Shows IP connections which are inspected by Dynamic
Filters.
show ip intrusion detection: Shows information of intrusion detection.
show ip rip table: Shows IP RIP table.
show ip route: Lists all or specified routes.
show ip secure filter bridge1: Show IP secure filter configuration.
show ip secure filter loopback1: Show IP secure filter configuration.
show ip secure filter loopback2: Show IP secure filter configuration.
show ip secure filter loopback3: Show IP secure filter configuration.
show ip secure filter loopback4: Show IP secure filter configuration.
show ip secure filter loopback5: Show IP secure filter configuration.
show ip secure filter loopback6: Show IP secure filter configuration.
show ip secure filter loopback7: Show IP secure filter configuration.
show ip secure filter loopback8: Show IP secure filter configuration.
show ip secure filter loopback9: Show IP secure filter configuration.
show ip secure filter null: Show IP secure filter configuration.
show ip secure filter pp: Show IP secure filter configuration.
show ip secure filter tunnel: Show IP secure filter configuration.
show ip secure filter wan1: Show IP secure filter configuration.
show ip secure filter LAN-INTERFACE: Show IP secure filter configuration.
show ipsec sa: Shows SA.
show ipv6 address: Shows the IPv6 address information.
show ipv6 connection: Shows IPv6 connections which are inspected by Dynamic
Filters.
show ipv6 connection detail: Shows IPv6 connections which are inspected by
Dynamic Filters.
show ipv6 mroute fib: Shows IPv6 multicast routes.
show ipv6 neighbor cache: Shows the IPv6 neighbor cache.
show ipv6 ospf: Shows OSPFv3 information.
show ipv6 rip table: Shows IPv6 RIP table.
show ipv6 route: Shows the IPv6 routing table.
show ipv6 secure filter bridge1: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback1: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback2: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback3: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback4: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback5: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback6: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback7: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback8: Show IPv6 secure filter configuration.
show ipv6 secure filter loopback9: Show IPv6 secure filter configuration.
show ipv6 secure filter null: Show IPv6 secure filter configuration.
show ipv6 secure filter pp: Show IPv6 secure filter configuration.
show ipv6 secure filter tunnel: Show IPv6 secure filter configuration.
show ipv6 secure filter LAN-INTERFACE: Show IPv6 secure filter configuration.
show lan-map LAN-INTERFACE: Shows Lan map status.
show lan-map LAN-INTERFACE: Shows Lan map status.
show lan-map BRIDGE-INTERFACE: Shows Lan map status.
show log: Shows log.
show macro: Shows macro.
show nat descriptor address: Shows the NAT address status.
show nat descriptor interface address pp: Shows the NAT address status for the
interface.
show nat descriptor interface address tunnel: Shows the NAT address status for
the interface.
show nat descriptor interface address wan1: Shows the NAT address status for
the interface.
show nat descriptor interface address LAN-INTERFACE: Shows the NAT address
status for the interface.
show nat descriptor interface bind pp: Shows the bind information of the NAT
descriptors.
show nat descriptor interface bind tunnel: Shows the bind information of the
NAT descriptors.
show nat descriptor interface bind wan1: Shows the bind information of the NAT
descriptors.
show nat descriptor interface bind LAN-INTERFACE: Shows the bind information
of the NAT descriptors.
show nat descriptor masquerade port: Shows port count used on IP masquerade.
show nat descriptor masquerade session: Shows session count used on IP
masquerade.
show nat descriptor masquerade session statistics: Shows session statistics
used on IP masquerade.
show pki certificate summary: Show certificate information.
show pki crl: Show CRL information.
show pppoe pass-through learning: Shows learning information.
show set: Shows variable.
show sshd authorized-keys: Shows the client's publickeys which stored in the
authorized-keys file.
If specified the fingerprint keyword, shows key length
and fingerprint of the keys.
show sshd host key: Shows the SSH host keys.
If specified the fingerprint keyword, Shows key length
and fingerprint of the keys.
show status backup: Shows Backup information.
show status bgp: Shows BGP information.
show status boot: Shows Boot information.
show status boot all: Shows Boot information.
show status boot list: Shows Boot information history.
show status cloud vpn: Shows information of cloud vpn function.
show status cooperation: Shows the cooperation information.
show status dhcp: Shows the status for DHCP.
show status dhcpc: Shows the status for DHCP Client.
show status ethernet: Shows the ethernet filter information.
show status external-memory: Shows the status for external memory.
show status heartbeat: Shows the status for heartbeat.
show status heartbeat2: Shows the status for heartbeat(release-2).
show status ip keepalive: Shows IP Keepalive information.
show status ipip: Shows the status for IPIP.
show status ipip tunnel: Shows the status for IPIP.
show status ipv6 dhcp: Shows DHCPv6 information.
show status ipv6 mld: Shows MLD information.
show status l2tp: Shows the status for L2TP.
show status l2tp tunnel: Shows the status for L2TP.
show status lua: Shows information of Lua script function.
show status mail service: Shows the status for MAIL Service.
show status mobile signal-strength: Shows the history of the signal strength.
show status netvolante-dns pp: Shows Netvolante DNS information.
show status netvolante-dns wan1: Shows Netvolante DNS information.
show status netvolante-dns LAN-INTERFACE: Shows Netvolante DNS information.
show status ngn: Shows the status for NGN.
show status ospf: Shows OSPF information.
show status packet-buffer: Shows the status of packet buffer.
show status pp: Shows the status for PP.
show status pptp: Shows the status for PPTP.
show status qos: Shows QoS information.
show status remote setup: Shows the status for remote setup.
show status rtfs: Shows information of RTFS.
show status sd: Shows the status for SD memory.
show status status-led: Shows the status for STATUS LED.
show status switch control: Shows information of switch control function.
show status switch control route backup: Shows information of route backup.
show status switching-hub macaddress: Shows switching-hub dynamic macaddress
table.
show status tunnel: Shows the status for TUNNEL.
show status upnp: Shows the status for UPnP.
show status usbhost: Shows the status for USB host.
show status usbhost modem: Shows the status for USB modem.
show status user: Shows the status for LOGIN User.
show status user history: Shows the status for LOGIN history.
show status vlan: Shows the status for VLAN.
show status vrrp: Shows VRRP information.
show status wan1: Shows the status for the WAN interface.
show status yno: Shows the status for YNO Agent.
show status yno las: Shows the status for LAS
show status BRIDGE-INTERFACE: Shows the status for the interface.
show techinfo: Shows technical support information.
show url filter: Show URL filter information.
sip 100rel: Sets that it supports SIP 100rel(RFC3262).
sip arrive address check: Enable or disable check user name for SIP arrival
call.
sip arrive ringing p-n-uatype: Enables or disables adding P-N-UAType header to
SIP Ringing response.
sip arrive session timer method: Specifies SIP method on call arriving, if
sip-session-timer is set and refresher is not
specified.
sip arrive session timer refresher: Specifies SIP refresher on call arriving,
if sip-session-timer is set and refresher is not
specified.
sip ip protocol: Specifies SIP IP protocol.
sip log: Enables or disables output of sip verbose log.
sip outer address: Sets outer address for SIP.
sip response code busy: Specifies SIP response code for busy.
sip session timer: Sets SIP session timer.
sip use: Enable or disable SIP VoIP function.
sip user agent: Sets SIP User-Agent header.
snmp community read-only: Assigns a name of community with SNMPv1 read-only
access mode.
snmp community read-write: Assigns a name of community with SNMPv1 read-write
access mode.
snmp display ipcp force: Display IPCP as SNMP interface address force.
snmp host: Sets the host accessible by SNMPv1.
snmp ifindex switch static index: Sets the static bind of switch's ifIndex.
snmp local address: Sets the source address of SNMP packet.
snmp syscontact: Sets the value of MIB variable 'sysContact'.
snmp syslocation: Sets the value of MIB variable 'sysLocation'.
snmp sysname: Sets the value of MIB variable 'sysName'.
snmp trap community: Assigns a community name of SNMPv1 trap.
snmp trap cpu threshold: Enables or disables send cpu threshold trap.
snmp trap delay-timer: Sets timer to wait for SNMP Trap.
snmp trap enable snmp: Enable SNMP traps.
snmp trap enable switch: Enable switch's SNMP traps.
snmp trap enable switch common: Enable common switch's SNMP traps.
snmp trap host: Sets the host receives the SNMPv1 trap messages.
snmp trap link-updown separate-l2switch-port LAN-INTERFACE: Select send trap
for each port link up/down.
snmp trap memory threshold: Enables or disables send memory threshold trap.
snmp trap mobile signal-strength: Enables or disables send mobile
signal-strength trap.
snmp trap send linkdown pp: Enables or disables send linkdown trap
snmp trap send linkdown tunnel: Enables or disables send linkdown trap
snmp trap send linkdown wan1: Enables or disables send linkdown trap
snmp trap send linkdown LAN-INTERFACE: Enables or disables send linkdown trap
snmp yrifppdisplayatmib2: Selects the value of MIB variable
'yrIfPpDisplayAtMib2'.
snmp yrifswitchdisplayatmib2: Selects the value of MIB variable
'yrIfSwitchDisplayAtMib2'.
snmp yriftunneldisplayatmib2: Selects the value of MIB variable
'yrIfTunnelDisplayAtMib2'.
snmp yrswindex switch static index: Sets the static bind of switch's
yrswindex.
snmpv2c community read-only: Assigns a name of community with SNMPv2c
read-only access mode.
snmpv2c community read-write: Assigns a name of community with SNMPv2c
read-write access mode.
snmpv2c host: Sets the host accessible by SNMPv2c.
snmpv2c trap community: Assigns a community name of SNMPv2c trap.
snmpv2c trap host: Sets the host receives the SNMPv2c trap messages.
snmpv3 context name: Sets the value of SNMP Context Name for SNMPv3.
snmpv3 engine id: Sets the value of SNMP Engine ID for SNMPv3.
snmpv3 host: Sets the host accessible by SNMPv3.
snmpv3 trap host: Sets the host receives the SNMPv3 trap messages.
snmpv3 usm user: Defines a USM user information for SNMPv3.
snmpv3 vacm access: Defines a access privilege of VACM user group for
SNMPv3.
snmpv3 vacm view: Defines a VACM view family for SNMPv3.
sntpd host: Specifies hosts accessible by SNTP.
sntpd service: Enables or disables SNTP service.
speed wan1: Sets interface speed in bit/s.
speed LAN-INTERFACE: Sets interface speed in bit/s.
ssh: Executes SSH.
ssh encrypt algorithm: Sets encrypt algorithm to use SSH client.
ssh known hosts: Sets a file to save remote host's public key.
sshd auth method: Sets authentication method to use SSH server.
sshd authorized-keys filename: Sets a file which stored client's publickeys.
sshd client alive: Use or not use client-alive with SSH.
sshd encrypt algorithm: Sets encrypt algorithm to use SSH server.
sshd hide openssh version: Sets whether to hide the OpenSSH version that is
included in the SSH server response.
sshd host: Sets hosts which is permitted to access via ssh.
sshd host key generate: Generate sshd host key.
sshd listen: Sets listen port of sshd server.
sshd service: Starts or stop sshd server.
sshd session: Sets number of ssh sessions.
statistics: config statistics resource.
switch config directory: Sets a directory path to save Switch's config file.
switch config filename: Sets a file to save Switch's config.
switch control config get: Transfer the config file from Switch.
switch control config set: Transfer the config file to Switch.
switch control firmware upload go: Upload firmware to the switch.
switch control function default: Set default value to all config of the
switch.
switch control function execute clear-counter: Clear counter.
switch control function execute clear-macaddress-table: Clear MAC address
table.
switch control function execute reset-loopdetect: Reset loopdetect status.
switch control function execute restart: Restart switch.
switch control function execute restart-poe-supply: Restart PoE power supply.
switch control function execute start-poe-supply: Start the PoE power supply.
switch control function execute stop-poe-supply: Stop the PoE power supply.
switch control function get boot-rom-version: Get BootROM version.
switch control function get counter-frame-rx-type: Get the value of
'counter-frame-rx-type'.
switch control function get counter-frame-tx-type: Get the value of
'counter-frame-tx-type'.
switch control function get energy-saving: Get the value of 'energy-saving'.
switch control function get firmware-revision: Get firmware revision.
switch control function get lag-load-balancing-rule: Get the rule of load
balancing for link aggregation.
switch control function get lag-type: Get the type of link aggregation.
switch control function get led-brightness: Get the value of 'led-brightness'.
switch control function get loopdetect-count: Get the value of
'loopdetect-count'.
switch control function get loopdetect-linkdown: Get the value of
'loopdetect-count'.
switch control function get loopdetect-port-use: Get the value of
'loopdetect-port-use'.
switch control function get loopdetect-recovery-timer: Get the value of
'loopdetect-recovery-timer'.
switch control function get loopdetect-time: Get the value of
'loopdetect-time'.
switch control function get loopdetect-use-control-packet: Get the value of
'loopdetect-use-control-packet'.
switch control function get macaddress-aging: Get the value of
'macaddress-aging'.
switch control function get macaddress-aging-timer: Get the value of
'macaddress-aging-timer'.
switch control function get mirroring-dest: Get the value of 'mirroring-dest'.
switch control function get mirroring-src-rx: Get the value of
'mirroring-src-rx'.
switch control function get mirroring-src-tx: Get the value of
'mirroring-src-tx'.
switch control function get mirroring-use: Get the value of 'mirroring-use'.
switch control function get model-name: Get model name.
switch control function get poe-class: Get the value of 'poe-class'.
switch control function get port-auto-crossover: Get the value of
'port-auto-crossover'.
switch control function get port-blocking-control-packet: Get the value of
'port-blocking-control-packet'.
switch control function get port-blocking-data-packet: Get the value of
'port-blocking-data-packet'.
switch control function get port-flow-control: Get the value of
'port-flow-control'.
switch control function get port-speed: Get the value of 'port-speed'.
switch control function get port-speed-downshift: Get the value of
'port-speed-downshift'.
switch control function get port-use: Get the value of 'port-use'.
switch control function get qos-dscp-remark-class: Get the value of
'qos-dscp-remark-class'.
switch control function get qos-dscp-remark-type: Get the value of
'qos-dscp-remark-type'.
switch control function get qos-policing-speed: Get the value of
'qos-policing-speed'.
switch control function get qos-policing-use: Get the value of
'qos-policing-use'.
switch control function get qos-shaping-speed: Get the value of
'qos-shaping-speed'.
switch control function get qos-shaping-use: Get the value of
'qos-shaping-use'.
switch control function get qos-speed-unit: Get the value of 'qos-speed-unit'.
switch control function get serial-number: Get serial number.
switch control function get status-combo-port: Get the status of combo port.
switch control function get status-counter-frame-rx: Get the value of Rx frame
counter.
switch control function get status-counter-frame-tx: Get the value of Tx frame
counter.
switch control function get status-counter-octet-rx: Get the value of Rx octet
counter.
switch control function get status-counter-octet-tx: Get the value of Tx octet
counter.
switch control function get status-fan: Get the status for fan.
switch control function get status-fan-rpm: Get the status for the fan rpm.
switch control function get status-led-mode: Get the status for led mode.
switch control function get status-loopdetect-port: Get the loopdetect status
of port.
switch control function get status-loopdetect-recovery-timer: Get the time
until re-linkup of linkdown port by loopdetect.
switch control function get status-macaddress-addr: Show port number learned
to MAC address table.
switch control function get status-macaddress-port: Show macaddress table of
each port.
switch control function get status-poe-detect-class: Get the status for the
poe detected class.
switch control function get status-poe-state: Get the status for the poe
state.
switch control function get status-poe-supply: Get the status for the poe
power supply.
switch control function get status-poe-supply-detail: Get the status for the
poe power supply.
switch control function get status-poe-supply-total: Get the status for the
total poe power supply.
switch control function get status-poe-temperature: Get the status for the
temperature.
switch control function get status-port-sfp-rx-power: Get the Rx light level
of SFP port.
switch control function get status-port-speed: Get the status for the port.
switch control function get system-macaddress: Get MAC address.
switch control function get system-name: Get the value of 'system-name'.
switch control function get system-uptime: Get uptime.
switch control function get vlan-access: Get the value of 'vlan-access'.
switch control function get vlan-id: Get the value of 'vlan-id'.
switch control function get vlan-multiple: Get the value of 'vlan-multiple'.
switch control function get vlan-multiple-use: Get the value of
'vlan-multiple-use'.
switch control function get vlan-port-mode: Get the value of 'vlan-port-mode'.
switch control function get vlan-trunk: Get the value of 'vlan-trunk'.
switch control function set counter-frame-rx-type: Set incoming frame type for
counter.
switch control function set counter-frame-tx-type: Set outgoing frame type for
counter.
switch control function set energy-saving: Enables or disables energy saving.
switch control function set led-brightness: Set led brightness.
switch control function set loopdetect-count: Set threshold of MAC address
moving count of loop detection.
switch control function set loopdetect-linkdown: Set the action when detect
loop.
switch control function set loopdetect-port-use: Enables or disables loop
detection of the port.
switch control function set loopdetect-recovery-timer: Set auto recovery timer
for linkdown by loop detection.
switch control function set loopdetect-time: Set threshold of MAC address
moving continuous time of loop detection.
switch control function set loopdetect-use-control-packet: Enables or disables
loop detection by switch control packet.
switch control function set macaddress-aging: Enables or disables MAC address
table aging.
switch control function set macaddress-aging-timer: Set aging interval of MAC
address table.
switch control function set mirroring-dest: Set sniffer port.
switch control function set mirroring-src-rx: Enables or disables port
mirroring for incoming traffic
switch control function set mirroring-src-tx: Enables or disables port
mirroring for outgoing traffic
switch control function set mirroring-use: Enables or disables port mirroring.
switch control function set poe-class: Set poe class of the port.
switch control function set port-auto-crossover: Enables or disables auto
crossover of the port.
switch control function set port-blocking-control-packet: Enables or disables
blocking switch control packet of the port.
switch control function set port-blocking-data-packet: Enables or disables
blocking data packet of the port.
switch control function set port-flow-control: Enables or disables flow
control of the port.
switch control function set port-speed: Set speed and mode of the port.
switch control function set port-speed-downshift: Enables or disables speed
downshift of the port.
switch control function set port-use: Use port or not.
switch control function set qos-dscp-remark-class: Set the DSCP remarking
class.
switch control function set qos-dscp-remark-type: Set the DSCP remarking type.
switch control function set qos-policing-speed: Set the speed level of the
port Rx policing.
switch control function set qos-policing-use: Enables or disables the port Rx
policing.
switch control function set qos-shaping-speed: Set the speed level of the port
Tx shaping.
switch control function set qos-shaping-use: Enables or disables the port Tx
shaping.
switch control function set qos-speed-unit: Set the QoS speed unit.
switch control function set system-name: Set device name.
switch control function set vlan-access: Set VLAN register number for port
base VLAN.
switch control function set vlan-id: Set VLAN ID for VLAN register number.
switch control function set vlan-multiple: Set the group number of the
multiple VLAN.
switch control function set vlan-multiple-use: Use multiple VLAN or not.
switch control function set vlan-port-mode: Set the VLAN port mode.
switch control function set vlan-trunk: Set VLAN register number for tag VLAN.
switch control mode: Set switch control mode.
switch control route backup: Set backup port for the route.
switch control use LAN-INTERFACE: Use switch control function or not.
switch control use LAN-INTERFACE: Use switch control function or not.
switch control use BRIDGE-INTERFACE: Use switch control function or not.
switch control watch interval: Specify the watch interval of switch and
counter to detect down.
switch select: Select switch.
syslog debug: Enables or disables output of SYSLOG(DEBUG).
syslog execute command: Enables or disables output of executed command.
syslog facility: Sets SYSLOG facility.
syslog host: Specifies hosts to send SYSLOG messages.
syslog info: Enables or disables output of SYSLOG(INFO).
syslog local address: Sets the source address of SYSLOG packet.
syslog notice: Enables or disables output of SYSLOG(NOTICE).
syslog srcport: Sets source port of SYSLOG.
system cpu threshold: set CPU threshold
system memory threshold: set memory threshold
system packet-buffer: set packet-buffer parameter
system temperature threshold: set temperature threshold
take lan-map snapshot LAN-INTERFACE: Takes the snapshot files.
take lan-map snapshot LAN-INTERFACE: Takes the snapshot files.
take lan-map snapshot BRIDGE-INTERFACE: Takes the snapshot files.
tcp log: Enables or disables TCP connection log.
tcp session limit: Sets a limit of TCP sessions for this router.
telnet: Executes TELNET client.
telnetd host: Sets hosts which is permitted to access via telnet.
telnetd listen: Sets listen port of telnetd server.
telnetd service: Starts or stop telnetd server.
telnetd session: Sets number of telnet sessions.
terminate lua: Terminates Lua script specified by task ID.
terminate lua file: Terminates Lua script specified by file name.
tftp host: Limits the host that can access by TFTP.
time: Sets time.
timezone: Sets timezone.
traceroute: Examines the route to specified host.
traceroute6: Examines the route to specified host.
tunnel backup: Specify the backup interface when detected down of
tunnel interface.
tunnel disable: Disable the selected TUNNEL interface.
tunnel enable: Enables the selected TUNNEL interface.
tunnel encapsulation: Selects encapsulation type of TUNNEL interface.
tunnel endpoint address: Sets tunnel endpoint addresses.
tunnel endpoint local address: Sets tunnel endpoint local IP address or host
name.
tunnel endpoint name: Sets tunnel endpoint name.
tunnel endpoint remote address: Sets tunnel endpoint remote IP address or host
name.
tunnel map-e: The Parameters used by the MAP-E tunnel connection is
set.
tunnel map-e type: Selects type for MAP-E TUNNEL.
tunnel multipoint limit: Sets connectable number to remote equipment in
point-to-multipoint tunnel.
tunnel multipoint local name: Sets the name to be used for point-to-multipoint
tunnel.
tunnel multipoint server: Sets server's address in point-to-multipoint tunnel.
tunnel name: Sets Name of TUNNEL interface.
tunnel ngn arrive permit: Enables or disables response for incoming call from
selected TUNNEL.
tunnel ngn bandwidth: Selects bandwidth for NGN.
tunnel ngn call permit: Allows or restricts outgoing call to selected TUNNEL.
tunnel ngn disconnect time: Adjusts or clears the disconnecting idle timer.
tunnel ngn fallback: NGN REMOTE endpoint that re-sends automatically is set
up.
tunnel ngn interface: LAN interface for NGN used by the NGN tunnel
connection is set.
tunnel ngn radius auth: Authenticates NGN telephone number via RADIUS, or not.
tunnel select: Selects TUNNEL interface.
tunnel template: Defines tunnel template.
tunnel type: Selects type of TUNNEL interface.
upnp external address refer: Defines interface to get IP address for UPnP
upnp port mapping timer: Sets expire timer for UPnP port mapping.
upnp port mapping timer type: Sets type for UPnP port mapping timer.
upnp syslog: Enable or disable output UPnP syslog.
upnp use: Use UPnP, or not.
url filter: Defines URL filter.
url filter log: Enable or disable output URL filter syslog.
url filter port: Sets port number to use URL filter.
url filter reject: Specify HTTP response action when reject by url
filter.
url filter use: Use URL filter or not.
url pp filter: Configures URL filtering for the interface.
url tunnel filter: Configures URL filtering for the interface.
url wan1 filter: Configures URL filtering for the interface.
url LAN-INTERFACE filter: Configures URL filtering for the interface.
usbhost modem flow control: It is set whether to do the flow control of the
modem.
usbhost modem initialize: Sets the AT Command for modem when initial setting
usbhost overcurrent duration: Adjusts the duration of overcurrent detection.
usbhost use: Use USB host, or not.
user attribute: Set user attribute.
vlan port mapping LAN-INTERFACE: Specifies VLAN to which switch ports belong.
vlan VLAN-INTERFACE 802.1q: Specifies the VLAN Identifier.
wan1 access limit connection length: Adjusts or clears the send/receive length
for specified WAN.
wan1 access limit connection time: Adjusts or clears the access time for
specified WAN.
wan1 access limit duration: Sets the total limit duration time for specified
WAN.
wan1 access limit length: Adjusts or clears the send/receive total length for
specified WAN.
wan1 access limit time: Adjusts or clears the total access time for specified
WAN.
wan1 access-point name: Sets an Access Point Name.
wan1 always-on: Enables or disables wan always-on connection.
wan1 auth myname: Sets my name and password for authentication.
wan1 auto connect: Enables or disables mobile internet access
auto-connection for specified WAN.
wan1 bind: Specified WAN and interface are bound.
wan1 disconnect input time: Adjusts or clears the interval waiting for next
input packet before disconnecting specified WAN.
wan1 disconnect output time: Adjusts or clears the interval waiting for next
output packet before disconnecting specified WAN.
wan1 disconnect time: Adjusts or clears the disconnecting idle timer for
specified WAN.
wins server: Sets up to 2 IP addresses of WINS servers.
wol send: Send Magic Packet for Wake On LAN to the target MAC
address.
yno access code: Set access code for YNO.
yno gui-forwarder timeout: Adjust the interval waiting for GFW connection.
yno https-proxy: Sets HTTPS Proxy-Server for YNO
yno las connection keepalive: Sets keepalive for the connection with LAS
server.
yno las request retry: Sets the retry count to transmit LAS request.
yno las request timeout: Sets the timeout waiting for response to the LAS
request transmitted
yno las syslog queue length: Sets the queue length for transmitting SYSLOG.
yno log: Activates specified type of additional SYSLOG.
yno use: Activates YNO Agent.
yno zero-config id: Set zero-config ID.